Why silicone keeps failing
Silicone is flexible but doesn’t bond well to damp grout and tile edges. As it peels, water gets in behind it and soaks into the floor joints. Re-siliconing over the top only hides the problem for a few months.
Our resealing process
We diamond-prep the joints, mechanically stripping out the failed silicone, mouldy grout and degraded perimeter joints across the shower floor, hob and vertical corners, then deep-sterilise them. The floor and wall-to-floor junctions are then filled with Australian-made 25 MPa two-part epoxy for a waterproof bond.
Back in the shower the next day
Most reseals take 3–4 hours. The epoxy needs 24 hours of dry curing before normal hot-water use, so you’re usually showering again the next day.
Fixed, upfront pricing
Every package includes the moisture check, thermal imaging and pressure test: $599 for a standard single shower (900×900 or 1000×1000 mm) and $799 for a double or walk-in shower, all-inclusive. See the full pricing or learn more about our leaking shower repairs across the Illawarra.
Frequently Asked Questions
Is resealing cheaper than retiling?+
Yes. A reseal is a fixed $599 for a standard single shower or $799 for a double/walk-in, compared with thousands for a full bathroom strip-out.
What warranty do I get?+
A lifetime service warranty covering the adhesion and waterproof integrity of the epoxy perimeter seals, subject to normal residential use and no major structural subsidence.